Bucket Wear Bars

Bucket Wear Bars

Part description:

Industrial Bucket Wear Parts White Iron Chocky Bars, Excavator Bucket Wear Parts Chocky Bars Chocky Wear Blocks For Wear Protection, Excavator Bucket Wear Parts Chocky Bars, Excavator Chocky Bars For Wear Protection, Excavator bucket wear Parts, Bucket Protection, White iron Cast Steel Chocky bars and Wear buttons, high chrome white iron Chocky Wear Blocks.

Laminated Wear Blocks are unique wear resistant materials in that they combine very high wear resistant qualities of a white iron(ASTM A532 15/3CrMo, 700BHN – 63HRc) with a weldable & high impact toughness mild steel through a metallurgical bond to create a product that is exceptionally resistant to impact and abrasion while retaining.

Wear Blocks combine is a combination of high chromium white iron metallurgical bonded to a mild steel backing plate. The white iron has a minimum hardness of 700 Brinell (63 Rc) providing maximum abrasion resistance protection for your equipment. The mild steel is easily weldable with minimal preparation and acts equipment. The mild steel is easily weldable with minimal preparation and acts as a cushion for the white iron, enabling it to handle impact and abrasion in the most extreme applications. Lamination of chrome moly white iron metallurgically bonded to a mild steel backing plate achieving a high strength joint. It's bonding shear strength is over 30,500 psi (or 210 Mpa) and will not separate.

Mechanical Property:

1) Tensile Strength 630Mpa Min.

2) Shearing Strength 250Mpa Min.

3) Hardness 63 HRC

Various types of white iron wear parts includes: chocky bar strips, round wear buttons, Wear Donuts, Standard Wear Bars, Microledges, Notched Wear Plates, Rockbox Liners, Shaped Wear Bars, skid bars, grizzly bars, s, NI-HARD PRODUCTS, Elbow Wear Bars, Wafer Strips, Shredder Hammer Tips, Knife EdgeChromium Carbide Overlay Wear Plates and more.

Chocky Bars

The standard is 23mm thick, length is 240mm, width could be from 25mm from 150mm. We can also produce according to your special requests

Wear Buttons

Ideal for smaller areas that require materials resistant to abrasion and impact.

Wear Donuts

Standard Wear Bars

Wear bars are available in thickness from 25 to 100mm, and width from 25 to 300mm, and in different lengths.

These bars offer superior wear life compared to conventional steel alloys such as manganese, Ni-hard and hardfacing wear plates.

Hot Tags: Bucket Wear Bars, China Bucket Wear Bars manufacturers, suppliers, factory, ,